Screening & Separation

HIGH-PRESSURE DENSITY SEPARATOR

High-pressure density separator separates material into higher density fraction and lower density fraction. When treating MSW,C&D waste and stale waste, it can always separate out the certain material by control of the air volume. High-pressure density separator is a necessary machine when producing RDF from MSW.

WORKING
PRINCIPLE

The high-pressure density separator is composed of a centrifugal fan, a separating unit with a rotating drum, a belt conveyor, and a connected settling chamber.According to the aerodynamic principle, the device uses air as the sorting medium to sort the MSW according to the density and the particle under the action of the airflow.The lighter materials (such as paper sheets, plastic bags, films, etc.) are carried up or horizontally to a farther place, while heavy materials are dropped by the updraft that cannot support them. In this way, material is separated by different density.

Technical
Data

Data / Model	1FFX800	1FFX1400	1FFX1600	1FFX2000
power(kw)	42.5	80.5/95.5	80.5/95.5	95.5/115.5
dimension(L×W×H，mm)	8750×2250×2950	8393×3750×3160	8393×3750×3160	13250×6170×7750
capacity	30~70m³/h	50~100m³/h	75~120m³/h	100~150m³/h

Features

The charging conveyor is a high-speed belt conveyor to evenly distribute the materials on itself to enhance the separating effect.

The air volume, wind speed and wind pressure at the fan outlet can be adjusted by the frequency converter.

The settling chamber is made of 3mm galvanized steel plate, which has the effect of anti-corrosion and anti-pres-sure.

The exhaust duct is equipped with an interface that can be connected to the deodorizing system.

Go back